Analysis of ecotoxic influence of waste from the biomass gasification process

Environmental Science and Pollution Research - The purpose of this research was evaluation of the effect of soil contamination with waste coming from biomass gasification on chosen indicators of...     

Histopathological changes in zebrafish embryos exposed to DLPCBs extract from Zhanjiang coastal sediment

Dioxin-like polychlorinated biphenyls (DLPCBs) are ubiquitous persistent pollutants that cause adverse effects in many environmental organisms. DLPCBs in marine sediments can be absorbed by benthic organisms, bioaccumulate, and biomagnify through the food chain and threaten animal and human health. There are no reports of DLPCBs concentrations in the Zhanjiang Gulf seabed. This study was designed to investigate the concentration of DLPCBs in the Zhanjiang coastal sediment and histopathological changes in zebrafish (Diano rerio) embryos exposed to environmentally relevant concentrations of DLPCBs. Of the five sites selected, two sites TS and JSW contained DLPCBs at concentrations of 0.08 and 22.54 ng/g dry sediment, respectively. Two groups of zebrafish embryos were used. One group was exposed to 3.75, 7.5, 15, 30, and 60 mg/ml of DLPCBs extracted from the sediments sampled from the TS site and the second group to 4.375, 8.75, 17.5, 35, and 70 mg/ml of DLPCBs from JSW site from 0.75 h post-fertilization (hpf) to 96 hpf. The zebrafish exposed to 60 and 70 mg/ml of DLPCBs at 96 hpf displayed gross histopathological changes with cardiac lesions including pericardial edema being the most deleterious. Other changes observed were hydropic degeneration of gill filaments and hepatocytes, loss of intestinal folds, and uninflated swim bladder. It appears that only a few sites of the Zhanjiang gulf are contaminated with DLPCBs. This is the first report of histopathological changes in the gills, hepatocytes, intestines, heart, and the swim bladder in zebrafish embryos exposed to DLPCBs from a coastal sediment. Further studies with sampling at different stages of development are required to identify which organ/tissue is most sensitive to DLPCBs.     

Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment

Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).     

Identifying resource and environmental carrying capacity in the Yangtze River Economic Belt,China: the perspectives of spatial differences and sustainable development

Environment, Development and Sustainability - The resource and environmental carrying capacity (RECC) is an important foundation and support for a city or region, and determines the direction of...     

Optimal Policy Mechanism Design for Cross-Sector and Multi-Stage Pollution Control with a Bilevel Model: Application to SO<Subscript>2</Subscript> Emission in China

In this paper, we construct a multi-stage coordinated programming model under tax system to control SO₂ emission. The model is based on an explicitly formulated SO₂ abatement cost function created under Chinese condition. Analysis of the effectiveness and impact on the economy of the model is carried out with consideration of game theory. By solving the model, theoretical results show that the volume-based multi-stage SO₂ tax system has two properties: effectiveness and equal-rate. Based on these theoretical results, empirical study is also performed using Chinese historical data. Compared with yearly single-stage programming model, the tax rate generated by the coordinated multi-stage programming model is time-invariant and rather moderate in scale. The total abatement cost among planning years in our model is 21.03 % less than the actual number and 6.68 % less than that in the single-stage situation. The tax payment suggested by our model is 10.62 % less than by the single-stage model. In general, a coordinated multi-stage programming model helps reduce the overall costs of environmental protection while achieving the same emission control target with less burden added to the economy.     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Effects of pig manure containing copper and zinc on microbial community assessed via phospholipids in soils

Pig manure (PM) is widely used as an organic fertilizer to increase yields of crops. Excessive application of compost containing relatively great concentrations of copper (Cu) and zinc (Zn) can change soil quality. To clarify the effects of different rates of application and to determine the optimal rate of fertilization, PM containing 1,115 mg Cu kg^?1, dry mass (dm) and 1,497 mg Zn kg^?1, dm was applied to alkaline soil at rates of 0, 11, 22, 44, 88, and 222 g PM kg^?1, dm. Phospholipid fatty acids (PLFAs) were used to assess soil microbial community composition. Application of PM resulted in greater concentrations of total nitrogen (TN), NH₄ ⁺-N, NO₃ ^?-N, total carbon (TC), soil organic matter (SOM) but lesser pH values. Soils with application rates of 88–222 g PM kg^?1, dm had concentrations of total and EDTA-extractable Cu and Zn significantly greater than those in soil without PM, and concentrations of T-Cu and T-Zn in these amended soils exceeded maximum limits set by standards in china. Except in the soil with a rate of 11 g PM kg^?1, dm, total bacterial and fungal PLFAs were directly proportional to rate of application of PM. Biomasses of bacteria and fungi were significantly greater in soils with application rates of 44–222 g PM kg^?1, dm than in the soil without PM. SOM, TC and EDTA-Zn had the most direct influence on soil microbial communities. To improve fertility of soils and maintain quality of soil, rate of application should be 22–44 g PM kg^?1 dm, soil containing Cu and Zn.     

How does carbon emission trading scheme affect enterprise green technology innovation: evidence from China’s A-share non-financial listed companies

Environmental Science and Pollution Research - More and more emphasis is placed on the common development of economy and ecological environment in China’s development strategy, and one of the...     

Effects of organic matter on Leymus chinensis germination,growth, and urease activity and available nitrogen in coastal saline soil

ABSTRACT

The present study was carried out to investigate the effect of three organic matters (stalk powder, microbial fertilizer, and manure) on Leymus chinensis germination, growth, and urease activity and available nitrogen (N) in coastal saline soil. The study was conducted in a completely randomized design with eight treatments: J₀V₀Y₀, J₁V₀Y₀, J₀V₁Y₀, J₀V₀Y₁, J₁V₁Y₀, J₁V₀Y₁, J₀V₁Y₁, J₁V₁Y₁. The notations were based on the quantities of each agent added to 1 kg of coastal saline soil: J₀ – no straw powder, J₁ – 0.2 kg straw powder, Y₀ – no manure, Y₁ – 0.3 kg manure, V₀ – no microbial fertilizer, V₁ – 0.2 L microbial fertilizer, each in quantic repeat. L. chinensis was sown as 50 seeds per pot. Results indicated that addition of organic agents exerted a significantly enhanced germination, increase in fresh weight and elevated soil urease activity. Soil available N levels were significantly positively correlated with soil urease activity and fresh weight, but not with germination rate. It is noteworthy that the halophyte L. chinensis showed improved characteristics when grown in coastal saline soil with addition of organic amendments.     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.